Airflow Salt Spray Corrosion Test Box Series

airflow salt spray corrosion test box series

Adaptability and reliability test of equipment and electronic components under marine climate conditions; It is also used to judge and assess the corrosion resistance of electroplating layer and paint film of metal coating, and to identify the accelerated corrosion test of metal materials.

The design and manufacture of this product comply with the national standard GB10587 "Technical Conditions of Salt Spray Test Chamber";

The sample test can be carried out in accordance with the national standard GB2423-17 "Basic environmental test procedures for electrical and electronic products, experimental ka: salt spray test methods" and IEC68-2-11 "Basic environmental test procedures part 2: experimental ka: salt spray" and other standards Related salt spray test.

As one of Salt Spray Cabinets Factories, the shell material of the salt spray test chamber is made of polyester FRP mold, with smooth and beautiful appearance, good acid-base resistance, corrosion resistance, light weight and high strength. This product has a device to control and adjust the amount of salt spray deposition, and the dual adjustment functions of inlet pressure and spray pressure, so that the salt spray test meets the standard requirements.。The spray electric control adopts high-precision microcomputer P.I.D. intelligent controller, Pt100 platinum resistance sensor, and large-screen backlit LCD display. Tower spray system, the salt spray is evenly distributed, the settlement amount can be adjusted freely, the upper cover adopts a water-sealed structure, and there is no salt spray overflow.Spray is equipped with two ways of continuous spray and periodic spray for users to choose. After the spray and spray stop time of the periodic spray controller is set, it can work automatically, and the operation is simple and convenient. It has independent temperature limiting protection device, overtemperature sound and light alarm device, and the timing range is 1min-999 hours and 59 minutes. The door can choose glass fiber reinforced plastic or transparent PVC material, and the upper cover of transparent PVC material can monitor the spray status in the box and the working condition of the sample at any time. The opening of the box door is started by compressed air, which is easy to operate (only yw-1000 type).

Serial number	project	technical parameter
1	Product model	SPTC-150	SPTC-250	SPTC-750	SPTC-1000
2	temperature range	room temperature +5-50℃
3	Temperature resolution	0.1℃
4	Temperature fluctuation	±0.5℃
5	Salt spray deposition rate	1.0-2.0ml/h·80cm2
6	Spray mode	Two types of continuous spraying and periodic spraying are optional (optional)
7	Power	1500W	2500W	4500W	5500W
8	Working power supply	AC 220V 50Hz		AC 380V 50Hz
9	Studio size mm	580×450×400	1000×640×500	1100×740×600	1300×1000×700
10	Overall dimension mm	1180×760×1100	1550×880×1230	1650×1050×1300	1880×1230×1660

Products Details

Featured Products

Contact us