Laboratory Mould Incubator Series

This product is a high-precision equipment with cold, heat, constant temperature and humidity (type III) control. It is widely used in medical treatment, drug inspection, health and epidemic prevention, environmental protection and other scientific research departments. It is a constant temperature equipment for the culture and protection of cells, bacteria, molds and microorganisms and the experiments of plant cultivation and breeding.

Products Details

The inner tank is made of high-quality mirror stainless steel, which has the characteristics of corrosion resistance, acid resistance, easy cleaning and no rust.

Microcomputer intelligent temperature controller, P.I.D. control, stable temperature control, high precision, LED high brightness digital display, intuitive and clear, with good control ability and anti-interference ability. Continuous working mode or timed working mode can be selected; It has the function of compressor overheating protection.

Double door structure: after the outer door is opened, observe the laboratory experiment through the inner door made of high-strength tempered glass, and the temperature is not affected. The working room is equipped with ultraviolet sterilization lamp; BOD socket (limited to type II 150L and above); The shelf of the studio is made of stainless steel, and the height of the shelf can be adjusted at will.

Optional programming control mode, can set a variety of operating parameters (including temperature, humidity, time, etc.) (limited to type III optional).

Double door structure: after the outer door is opened, observe the laboratory experiment through the inner door made of high-strength tempered glass, and the temperature and humidity are not affected. Ultraviolet sterilization device is installed in the studio.

The independent temperature limit alarm system automatically interrupts when the temperature exceeds the limit to ensure the smooth progress of the experiment (optional).

It can be equipped with printer or RS-485 interface to connect computer to record the change of test parameters (optional). The side of the box is equipped with test holes to facilitate experimental operation and temperature measurement (optional).

number

project Mold Incubator -Ⅱ Mold Incubator -Ⅲ

1

Product symbol SPTCMJ-80-02 SPTCMJ-160-02 SPTCMJ-250-02 SPTCMJ-300-02 SPTCMJ-160-03 SPTCMJ-250-03 SPTCMJ-300-03

2

Volume 80L 150L 250L 300L 150L 250L 300L

3

Heating / cooling mode Stainless steel electric heater / totally enclosed fluorine-free compressor

4

temperature range 0℃~60℃ 0℃~60℃(10 ℃ - 45 ℃ during humidification)

5

Temperature resolution 0.1℃

6

Humidity control range —— 50-95% humidity control fluctuation ± 5% RH (25 ℃ ~ 40 ℃)

7

Humidification mode —— External ultrasonic humidifier

8

Temperature fluctuation ±0.5℃ ± 0.5 ℃ (heating operation state)± 1 ℃ (refrigeration operation state)

9

Number of shelves two three

10

cryogen R134a (fluorine free environmental protection)

11

working hours 1 minute - 99 hours 59 minutes or continuous 1-9999 hours or continuous

12

Power 300W 400W 500W 700W 800W 850W 1000W

13

Working power supply AC  220V 50Hz

14

Studio size mm 440×320×520 480×390×780 570×500×850 570×540×950 480×390×780 570×500×850 570×540×950

15

Overall dimension mm 570×545×1120 610×625×1435 700×715×1500 700×735×1600 610×625×1435 700×715×1500 700×735×1600

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours